*Excludes Local Taxes*
Products are built on order, general delivery is 8~16weeks and includes sea freight to most seaports.
Standard SNV-4x200 Hydraulic Corner Notcher with 40-130° Variable Angle:
A hydraulic corner notcher with variable angle is a machine tool used to cut precise notches or corners on sheet metal and other similar materials. This type of notcher uses a hydraulic system to power the cutting process, and it has a variable angle capability that allows operators to adjust the cutting angle according to their needs.
The hydraulic corner notcher consists of a worktable, a notching head, and a hydraulic system. The worktable is where the material to be notched is placed, and it has a back gauge that ensures accurate positioning of the material. The notching head is mounted on a slide that moves up and down, and it has a blade that makes the cut.
The hydraulic system provides the power to move the notching head and blade, and it is controlled by a foot pedal or a hand-operated lever. The variable angle capability is achieved through the use of a tilting mechanism that allows the notching head to be adjusted to different angles.
To use the hydraulic corner notcher, the material to be notched is placed on the worktable and positioned against the back gauge. The operator then adjusts the cutting angle using the tilting mechanism and activates the hydraulic system to lower the notching head and make the cut. The notched material is then removed from the worktable.
Hydraulic corner notcher with variable angle are commonly used in metal fabrication, HVAC, and other industries that require precise notching of sheet metal and other materials. They are designed for high volume production and can handle a wide range of material thicknesses and angles.
Delivery is 8-10weeks from Order
Here are the steps to use a Hydraulic Corner Notcher with Variable Angle:
Set up the machine: Ensure that the hydraulic corner notcher is properly installed, and all safety guards are in place. Make sure that the hydraulic system is properly connected, and there is enough hydraulic oil in the reservoir.
Adjust the back gauge: Adjust the back gauge to the desired distance from the cutting blade, depending on the size and shape of the material to be notched.
Adjust the cutting angle: Use the tilting mechanism to adjust the cutting angle according to your requirements. The angle can be adjusted between 30 to 140 degrees, depending on the model of the machine.
Place the material: Place the material to be notched onto the worktable, ensuring it is lined up against the back gauge and held securely in place.
Start the machine: Press the foot pedal or hand-operated lever to activate the hydraulic system, which will lower the notching head and the cutting blade onto the material.
Make the cut: The cutting blade will then make a precise notch in the material as it is moved along the cutting line. Ensure that the cutting process is smooth and steady to achieve a clean and accurate cut.
Remove the material: Once the cut is complete, remove the notched material from the worktable.
Repeat: Repeat the process for the remaining materials to be notched, adjusting the cutting angle and back gauge as necessary.
Turn off the machine: Once finished, turn off the machine and disconnect it from the power source.
It is essential to follow all safety procedures when using a Hydraulic Corner Notcher with Variable Angle to avoid accidents and injuries. Always wear appropriate personal protective equipment and follow the manufacturer's instructions for safe operation.