STANDARD PRH3-10x2500 Hydraulic 3-Rolls Plateroller with Pre-Bend
$30,356
Machines are built on order, delivery is 9~14 weeks Shipped Worldwide- Prices include freight to your nearest sea port*
*Excludes Local Taxes, TC Apply on Delivery*
Description
Standard PRH3-10x2500 Hydraulic 3-Rolls Plate roller with Pre-Bend:
The Hydraulic 3-Rolls Plate roller with Pre-Bend is a reliable plate rolling machine, featuring three rolls driven by a planetary gear hydraulic motor providing torque with no mutual sliding between the work piece and the basic roll. This machine is specially designed with self-aligning roller bearings that provides a stable operating environment. Enjoy an arc up and down movement with this top-tier plate rolling machine.
Our Hydraulic 3-Rolls Plate roller with Pre-Bend boasts an arc down-adjusting 3-roller rolling design, providing efficient sheet metal shaping without the need of accessory devices. This plate rolling machine features a robust main structure, including tip side of the rack, fixed side of the rack, work roll, drive, hydraulic system, and electrical control system. Perfect for reliable pre-deformation of both ends and precise sheet forming.
Main Features:
Italy Technology.
Upper-roll fixed, the two rollers under a fixed turn around the center arc movement take-off and landing, under two separate movements can roll up or down with.
On a plate material does not need to complete U-turn and pre-bending roll-round school, and other processes.
Rollers are mainly the work of the three-driven roller to ensure that any thickness of the material sent to a good rolling function.
Due to the location of the three roller can rely on the close,to achieve a small diameter tube and rolling round the school.
Specification
Max bending thickness - 10mm = 0.39 inches
Pre-bending thickness - 8mm = 0.31 inches
Max bending width length - 2500mm = 98.43 inches
Yield limit - 245Mpa = 35,528 psi
Top roller diameter - 230mm = 9.06 inches
Bottom roller diameter - 230mm = 9.06 inches
Main power - 11kW = 14.8 horsepower
Delivery
This machine is specifically built and the delivery is 9-14 Weeks from Deposit.
How to use a Hydraulic 3-Rolls Plate roller with Pre-Bend
To use a hydraulic 3-roll plate roller with pre-bend, you will need to follow these general steps:
Set up the machine: Before using the machine, make sure it is properly set up and adjusted to the correct settings for the plate you will be working with. This includes adjusting the rollers to the correct distance apart and setting the pre-bend function to the desired amount.
Load the plate: Place the plate between the top and bottom rollers, with the edge to be bent facing the middle roller. Use the machine's controls to guide the plate through the rollers and into the pre-bend function.
Adjust the rollers: As the plate passes through the rollers, use the machine's controls to adjust the position of the top and bottom rollers. This will determine the amount of bend in the plate.
Pass the plate through the rollers: Once the rollers are adjusted, pass the plate through the rollers again to complete the bending process. Repeat this process as needed to achieve the desired shape.
Unload the plate: Once the plate has been bent to the desired shape, use the machine's controls to unload the plate from the rollers.
Note: Always read the manufacturer's instructions for your specific machine before using it, and always use appropriate personal protective equipment (PPE) such as gloves, safety glasses, and hard hat.
*Information shown may differ or change without warning*
