Name: STANDARD HG-400 Hydraulic Garage Press 400 tons
Brand: STANDARD Machine Tools
SKU: HG-400
Price: 25212.53 USD
Availability: InStock

To use a hydraulic garage press with 400-ton capacity, follow these steps:

Prepare the workpiece: Clean and inspect the metal part to be pressed and ensure it is free of any defects or sharp edges that could damage the press.
Position the workpiece: Place the workpiece on the bed or platen of the press, ensuring it is secure and properly aligned.
Adjust the press: Use the controls to raise or lower the press arm to the desired height and to adjust the pressure settings to match the requirements of the job.
Activate the press: Turn on the power to the press and activate the hydraulic system. Slowly apply pressure to the workpiece until it is fully pressed.
Monitor the process: Observe the workpiece carefully to ensure it is being pressed correctly. If any adjustments are needed, use the controls to adjust the press as required.
Release the pressure: Once the pressing process is complete, turn off the power to the press and release the hydraulic pressure.
Remove the workpiece: Carefully remove the pressed workpiece from the press and inspect it to ensure it meets your requirements.

Note: Always follow the manufacturer's instructions and safety guidelines when using a hydraulic garage press. Never exceed the maximum capacity of the press and always use proper protective gear, such as safety glasses and gloves.

To use a hydraulic garage press with 400-ton capacity, follow these steps:

Prepare the workpiece: Clean and inspect the metal part to be pressed and ensure it is free of any defects or sharp edges that could damage the press.
Position the workpiece: Place the workpiece on the bed or platen of the press, ensuring it is secure and properly aligned.
Adjust the press: Use the controls to raise or lower the press arm to the desired height and to adjust the pressure settings to match the requirements of the job.
Activate the press: Turn on the power to the press and activate the hydraulic system. Slowly apply pressure to the workpiece until it is fully pressed.
Monitor the process: Observe the workpiece carefully to ensure it is being pressed correctly. If any adjustments are needed, use the controls to adjust the press as required.
Release the pressure: Once the pressing process is complete, turn off the power to the press and release the hydraulic pressure.
Remove the workpiece: Carefully remove the pressed workpiece from the press and inspect it to ensure it meets your requirements.

STANDARD HG-400 Hydraulic Garage Press 400 tons

Description

Specification

Standard Features

Optional Extras

Delivery

Catalogue

How to use a Hydraulic Garage Press

Information shown may differ or change without warning