Miraco 3d Scanner now under $1500...
Miraco 3d Scanner now under $1500...
*Excludes Local Taxes*
Products are built on order, general delivery is 8~16weeks and includes sea freight to most seaports.
The STANDARD OLA-50 Portable Line Borer is designed to be more portable, its compact design is easier to transport and setup (Compared to Hydraulic models). The Ø50mm bar and single phase electric drive system is ideal for light and medium boring and facing applications with a boring capacity of Ø55-300mm.
Quick Spec:
The kit is supplied with the below items
Delivery is 8 weeks from payment (Sea freight)
EXPRESS 4-6 weeks from payment (Air freight)
Here are the basic steps for using a Portable Line Borer:
Preparation: Before using the Portable Line Borer, make sure it is properly assembled and all components are tightened securely. Read and understand the operator's manual and any relevant safety guidelines.
Site preparation: Choose a flat, level surface for the Portable Line Borer and make sure it is securely anchored to prevent movement during use.
Alignment: Align the boring bar with the centerline of the hole to be bored and ensure that it is perpendicular to the surface.
Cutting fluid: Apply cutting fluid to the cutting edge of the tool and to the area around the hole to be bored. This will help to lubricate the cutting process and remove heat from the area.
Boring operation: Start the Portable Line Borer and slowly feed the boring bar into the material, using the feed handles to control the speed and direction of cutting.
Monitoring progress: Continuously monitor the progress of the boring operation and make adjustments to the speed and direction of the cutting as necessary.
Finishing: When the desired hole depth is reached, stop the Portable Line Borer and remove the boring bar from the hole. Clean up any cutting fluid or debris from the area.
Note: Always follow the manufacturer's recommendations and safety guidelines when using a Portable Line Borer to ensure proper and safe operation.
The STANDARD OLA-50 Portable Line Borer is designed to be more portable, its compact design is easier to transport and setup (Compared to Hydraulic models). The Ø50mm bar and single phase electric drive system is ideal for light and medium boring and facing applications with a boring capacity of Ø55-300mm.
Quick Spec:
The kit is supplied with the below items
Delivery is 8 weeks from payment (Sea freight)
EXPRESS 4-6 weeks from payment (Air freight)
Here are the basic steps for using a Portable Line Borer:
Preparation: Before using the Portable Line Borer, make sure it is properly assembled and all components are tightened securely. Read and understand the operator's manual and any relevant safety guidelines.
Site preparation: Choose a flat, level surface for the Portable Line Borer and make sure it is securely anchored to prevent movement during use.
Alignment: Align the boring bar with the centerline of the hole to be bored and ensure that it is perpendicular to the surface.
Cutting fluid: Apply cutting fluid to the cutting edge of the tool and to the area around the hole to be bored. This will help to lubricate the cutting process and remove heat from the area.
Boring operation: Start the Portable Line Borer and slowly feed the boring bar into the material, using the feed handles to control the speed and direction of cutting.
Monitoring progress: Continuously monitor the progress of the boring operation and make adjustments to the speed and direction of the cutting as necessary.
Finishing: When the desired hole depth is reached, stop the Portable Line Borer and remove the boring bar from the hole. Clean up any cutting fluid or debris from the area.
Note: Always follow the manufacturer's recommendations and safety guidelines when using a Portable Line Borer to ensure proper and safe operation.
Machine Specialists
International Sales
Online Support
Superior Quality