STANDARD URT-1100 Ram Head Universal Mill - Twin Spindle

Here are some basic steps for using this type of milling machine:

1. Preparation: Before starting the machine, ensure that it is properly lubricated and that all safety guards and guards are in place. Check that the spindles are clean and free of debris and that the milling cutters are properly installed and tightened.
2. Setting up the workpiece: Mount the workpiece on the table or bed of the milling machine, using the appropriate fixtures or clamps. Make sure the workpiece is secure and will not move during machining.
3. Selecting the milling cutter: Choose the appropriate milling cutter for the job, based on the material and the type of operation being performed. Mount the cutter in the spindle, tightening it securely.
4. Setting the spindle speed: Select the appropriate spindle speed for the material and the milling cutter being used. Most milling machines have a variable speed control to adjust the spindle speed as needed.
5. Adjusting the ram head: Position the ram head to the desired angle for the operation being performed. Make sure the head is securely locked in place.
6. Starting the machine: Turn on the milling machine and begin the operation. Move the table or the workpiece, as necessary, to bring the cutter into contact with the material.
7. Monitoring the operation: Keep an eye on the milling operation, checking for any signs of vibration, excessive noise, or other issues. If any problems occur, stop the machine immediately and address the issue.
8. Finishing the operation: When the machining is complete, turn off the milling machine and remove the workpiece. Clean up any debris or chips generated during the operation.

It is important to follow proper safety procedures when using a Ram Head Universal Mill with twin spindles, including wearing eye and hearing protection, keeping loose clothing and long hair away from the moving parts, and using caution when working around sharp cutters and hot chips.