STANDARD PRH4-16x3000 Hydraulic 4-Roll Plate roller with Pre-Bend
R 991,545.00
Machines are built on order, delivery is 9~14 weeks Shipped Worldwide- Prices include freight to your nearest sea port*
*Excludes Local Taxes, TC Apply on Delivery*
Description
STANDARD is a leader in the production and supply of Rolling Machines; suited for bending metal plates of varying thicknesses. Our products guarantee optimal precision, productivity and durability.
The STANDARD hydraulic 4-roll plate roller is designed to bend and shape metalwork, producing round, arc, and conical pieces accurately within a specific realm. It is also capable of flattening sheet metal.
The Plate roller is a type of special metal forming machine that can change sheet metals into curved shapes such as cylinders, spheres, or other forms. It is widely used in heat forging, boiler construction, chemical engineering, and non-metal machinery production. This has enabled rapid development in the rolling machine industry.
Main Features:
A single pass completes the pre-bending and rolling process.
This 4-roller device facilitates bending the plate into cylindrical, arced, or conical shapes.
The top roller serves as the driving roller, powered by a hydraulic motor.
The bottom roller is powered hydraulically to clamp the material, while the Side Roller operates independently..
Specification
Max Bending Thickness - 16mm = 0.630 inches
Pre-Bending Thickness - 13mm = 0.512 inches
Roller working length - 3100mm = 122.05 inches
Plate Yield Limit - 245Mpa = 35,503.06 psi
Top Roller Diameter - 360mm = 14.17 inches
Bottom Roller Diameter - 330mm = 12.99 inches
Side Roller Diameter - 250mm = 9.84 inches
Main Motor Power - 15kW = 20.11 horsepower
Machine Dimensions - 6300x2000x2050mm = 248.03 x 78.74 x 80.71 inches.
Weight - 17000kg = 37,478 lbs
Optional Device
Siemens K500 NC control system
Alien s650 CNC control system
Laser sensor
Delivery
This machine is specifically built and the delivery is 9-14 Weeks from Deposit.
How to use a Hydraulic 4-Roll Plate roller with Pre-Bend
Start by preparing the sheet metal that you want to bend. Make sure that it is clean, free of any debris, and properly aligned.
Adjust the top roll to the desired pre-bend angle. This roll will be used to make a small bend in the metal before the main bending operation.
Position the sheet metal between the bottom roll and the top roll, with the pre-bend angle facing up.
Slowly begin to apply pressure to the bottom roll, using the hydraulic motor. As the metal begins to bend, continue to adjust the top roll to achieve the desired angle.
Once the desired bend angle is achieved, stop the machine and remove the sheet metal.
Repeat the process for any additional pieces of metal that need to be bent.
It's important to note that before using the machine, the operator should be trained and familiar with the machine operation and safety measures. Also, the machine should be properly maintained and in good working condition.
*Information shown may differ or change without warning*
