STANDARD SGM-4x2500mm Motorized Guillotine

Description

Standard SGM-4x2500 Mechanical Motorized Guillotine with auto hold down system: 

A mechanical motorized guillotine is a machine that uses a motor to power a blade that can be used to cut through materials. The blade is typically mounted on a sliding mechanism that is moved by the motor, and the material to be cut is placed on a cutting surface below the blade. The machine is operated by a control panel or buttons and can be used to cut a variety of materials such as paper, cardboard, and plastic. Safety features are typically built in to prevent injury to the operator.

Main Features:

• Structured finished products,
• Low center of gravity, 
• Sound vibration-proof performance 
• Stable property.
• Long-life of high quality blade
• Back gauge is available to give fine adjustment
• Simple construction with good appearance
• Easy to operate with lower energy consumption
• Widely used for medium and thick steel

Specifications

• Cutting Thickness - 0.5~4mm (mild steel) = 0.0197 inches ~ 0.1575 inches
• Cutting Thickness - 0.5~2mm (stainless steel) = 0.0197 inches ~ 0.0787 inches
• Cutting Length - 2500mm = 98.43 inches
• Cutting Angle - 1.5°
• Cuts Per Minute - 18/strokes
• Frame Type - Fabricated
• Hold Down - Yes (automatic)
• Motor - 5.5kW = 7.38 horsepower
• Dimensions - 3450x1400x1380mm (LxWxH) = 135.83 x 55.12 x 54.33 inches
• Weight - 2650kg = 5842.75 pounds

Delivery

Delivery is 9-14 Weeks from Deposit

How to use a Mechanical Motorized Guillotine

To use a mechanical motorized guillotine, follow these steps:

1. Set up the machine on a stable surface, making sure it is level and secure.

2. Adjust the cutting surface to the desired height and lock it in place.

3. Turn on the power to the machine and allow it to warm up, if necessary.

4. Place the material to be cut onto the cutting surface, making sure it is aligned with the blade and in the correct position.

5. Use the control panel or buttons to lower the blade onto the material.

6. Once the blade has cut through the material, use the control panel or buttons to raise the blade back to its starting position.

7. Turn off the power to the machine and remove the cut material from the cutting surface.

8. Clean the blade and cutting surface as necessary to prevent build-up of debris.

Note: Always follow the manufacturer's instructions for your specific machine, wear safety gear(gloves and goggles) and never leave the machine running unattended.