"Grind with Precision, Perfect Surfaces Every Time."
R 364,447.00 -
R 512,454.00R 0.00
*Excludes Local Taxes*
*Products are built on order, general delivery is 8~16weeks and include Sea Freight to most ports
Description
An automatic hydraulic surface grinder is a machine tool that is used to achieve precise and accurate finishes on flat metal surfaces. It typically consists of a grinding wheel, a work table that moves back and forth, and a reciprocating spindle that holds the workpiece. The grinding wheel is rotated by an electric motor and is brought into contact with the workpiece in order to remove material.
One of the key features of an automatic hydraulic surface grinder is its hydraulic control system, which provides power to the work table and spindle, and enables precise and consistent movement and positioning. The hydraulic system allows the operator to control the speed and pressure of the grinding process, and can be adjusted to accommodate different types of materials and grinding applications.
Another important feature of an automatic hydraulic surface grinder is its automatic feed mechanism, which advances the workpiece under the grinding wheel at a precise and controlled rate. This helps to ensure consistent and accurate results, and reduces the need for manual intervention.
Overall, an automatic hydraulic surface grinder is a highly precise and efficient machine tool that is widely used in manufacturing, metalworking, and engineering applications for producing flat and accurate surfaces.
Specifications
Description
Metric
Imperial
Working surface of table
300x600mm
11.8x23.6 inches
Table travel
660mm
26 inches
Cross travel
340mm
13.4 inches
Distance between table surface and spindle center
520mm
20.5 inches
Table load
420kg
925 lbs
T- Slot ( number / width )
1 x 14 mm
1 x 0.55 inches
Table Speeds
5 - 25 m / min
16.4 - 82.0 feet/ min
Cross Feed Handwheel
0.02mm/graduation
5mm/revolution
0.0008 in/graduation
0.2 in/revolution
Automatic cross feed of saddle
0.5 - 12 mm
0.02 - 0.47 in
Power cross feed
950 mm / min
37.4 in/min
Grinding wheel dimensions
355 x 40 x 127 mm
14 x 1.6 x 5 in
Spindle Speed
1740 rpm
1740 rpm
Vertical handwheel
0.01 mm /graduation
2 mm/revolution
0.0004 in/graduation
0.08 in/revolution
Auto. Down Feed
0.005~0.025mm/step
0.0002 - 0.001 inches/step
Vertical Rapid Feed Speed
230mm
9.1 inches/minute
Vertical Feed Motor
90W
0.12hP
Spindle Motor
4kW
5.36 hP
Hydraulic Motor
1.5kW
2.01 hP
Coolant Motor
90W
0.12 hP
Cross Feed Motor
90W
0.12 hP
Floor Space
2600x2500mm
102.4x98.4 inches
Weight
2210kg
4872 lbs
Standard Features
Grinding Wheel
Wheel Flange
Mounting Feed
Delivery
Delivery is 8-12 Weeks from Deposit
How to use an Automatic Hydraulic Surface Grinder
To use an automatic hydraulic surface grinder, you should follow these steps:
Preparation:Before using the grinder, inspect the machine for any damage or issues, and make sure that it is properly lubricated and secured. Review the manufacturer's manual and ensure that you are familiar with the grinder's operation and safety guidelines.
Mounting the workpiece: Secure the workpiece to the work table and align it with the grinding wheel. If necessary, use clamps or vises to hold the workpiece in place.
Adjusting the grinding wheel: Adjust the height of the grinding wheel so that it is level with the workpiece. Set the speed of the grinding wheel and make sure that it is rotating in the correct direction.
Starting the grinder: Turn on the grinder and make sure that the workpiece is not in contact with the grinding wheel. Adjust the hydraulic control system to set the speed and pressure of the grinding process.
Grinding: Begin the grinding process by lowering the workpiece into contact with the grinding wheel. Keep your hands clear of the grinding wheel and be prepared to stop the machine if necessary.
Monitoring the process:Continuously monitor the grinding process and adjust the hydraulic control system as needed. Check the workpiece periodically to ensure that it is being ground evenly and to your desired specifications.
Finishing the process: Once you have completed the grinding process, turn off the grinder and remove the workpiece from the work table. Inspect the workpiece to ensure that it meets your specifications.
It is important to follow all safety precautions when using an automatic hydraulic surface grinder, including wearing appropriate personal protective equipment, such as eye protection and gloves, and following all manufacturer's instructions.
*Information shown may differ or change without warning*
