Name: STANDARD TE-1600 Series Horizontal Lathe - Ø1600mm Swing and 3,000~16,000mm B/C
Brand: STANDARD Machine Tools
SKU: TE-1600x3000
Price: 1638813.0 ZAR
Availability: InStock

Using a heavy-duty horizontal lathe involves several steps that must be taken carefully to ensure safety and accuracy.

Here's a general guide on how to use a heavy-duty horizontal lathe:

Prepare the workpiece: Make sure that the workpiece is properly cleaned, deburred, and secured onto the lathe using the appropriate holding devices such as chucks, collets or faceplates. Ensure that the workpiece is properly centered and leveled.
Set the cutting tools: Select the appropriate cutting tool for the task at hand. The cutting tool should be securely fastened in the tool post, and its position and orientation adjusted to ensure accurate cutting.
Set the lathe speed: Adjust the spindle speed based on the material being machined, the size of the workpiece, and the desired finish. The recommended spindle speed can usually be found in the lathe's manual.
Start the lathe: Turn on the lathe and adjust the speed to the desired level. Ensure that the lathe is running smoothly and that there are no vibrations or unusual noises.
Make the cuts: With the lathe running, carefully guide the cutting tool along the workpiece, making the necessary cuts. Use the handwheels to adjust the depth of cut, the feed rate, and the cutting direction.
Inspect the workpiece: After each cut, inspect the workpiece for accuracy and quality. Make any necessary adjustments to the cutting tool or the lathe speed as required.
Turn off the lathe: When finished, turn off the lathe and allow it to come to a complete stop before removing the workpiece.
Clean up: Clean the lathe, cutting tools, and work area, and properly store the lathe and accessories.

It is essential to follow all safety precautions when using a heavy-duty horizontal lathe. Wear appropriate protective equipment, such as eye protection and gloves, and be aware of the lathe's emergency stop and other safety features. Additionally, make sure to read and follow the manufacturer's instructions and recommended procedures for your specific model of lathe.

Using a heavy-duty horizontal lathe involves several steps that must be taken carefully to ensure safety and accuracy.

Here's a general guide on how to use a heavy-duty horizontal lathe:

Prepare the workpiece: Make sure that the workpiece is properly cleaned, deburred, and secured onto the lathe using the appropriate holding devices such as chucks, collets or faceplates. Ensure that the workpiece is properly centered and leveled.
Set the cutting tools: Select the appropriate cutting tool for the task at hand. The cutting tool should be securely fastened in the tool post, and its position and orientation adjusted to ensure accurate cutting.
Set the lathe speed: Adjust the spindle speed based on the material being machined, the size of the workpiece, and the desired finish. The recommended spindle speed can usually be found in the lathe's manual.
Start the lathe: Turn on the lathe and adjust the speed to the desired level. Ensure that the lathe is running smoothly and that there are no vibrations or unusual noises.
Make the cuts: With the lathe running, carefully guide the cutting tool along the workpiece, making the necessary cuts. Use the handwheels to adjust the depth of cut, the feed rate, and the cutting direction.
Inspect the workpiece: After each cut, inspect the workpiece for accuracy and quality. Make any necessary adjustments to the cutting tool or the lathe speed as required.
Turn off the lathe: When finished, turn off the lathe and allow it to come to a complete stop before removing the workpiece.
Clean up: Clean the lathe, cutting tools, and work area, and properly store the lathe and accessories.

Description	Metric	Imperial
Swing Over Bed	Φ1600mm	62.9921 in
Swing Over Carriage	Φ1200mm	47.2441 in
Length of work piece	1500mm - 16000mm	59.055 in to 629 in
Weight of work piece	10 ton	22000lbs
Guide rail width	1250mm	49.2125 in
Spindle bore	Φ130mm	5.1181 in
Taper in spindle nose	Φ140mm	5.5118 in
Number of speeds	21 kinds 12 kinds	21 kinds 12 kinds
Spindle speed	Forward - 2-200r/min Reverse - 2.24-178r/min	Forward - 2-200r/min Reverse - 2.24-178r/min
Longitudinal	0.1-12mm	0.00394 to 0.47244 in
Cross	0.05 -6mm	0.00197 to 0.23622 in
Top Slide	0.025-3mm	0.00098 to 0.11811 in
Thread pitch scope of the metric system	44 Kinds 1-120	44 Kinds 1-120
Englishmen scope Thread	31 Kinds 24-1/4t.p.i	31 Kinds 24-1/4t.p.i
Range of module threads	45 Kinds 0.5-60mm	45 Kinds 0.5-60mm
Range of diametral pitch threads	38 Kinds 1/2-56DP	38 Kinds 1/2-56DP
Carriage	Two Sets	Two Sets
Max cross travel of lower slide	960mm	37.795 in
Max travel of mid slide	300mm	11.811 in
Travel of tailstock quill	200mm	7.874 in
Rapid traverse speed of tool post	3740mm/min 1870mm/min 935mm/min	147.244 in/min 73.622 in/min 36.811 in/min
Diameter of tailstock quill	180mm	7.0866 in
Max travel of quill	300mm	11.811 in
Taper in bore of tailstock quill	Metric 80#	Metric 80#

Description	Metric	Imperial
Swing Over Bed	Φ1600mm	62.9921 in
Swing Over Carriage	Φ1200mm	47.2441 in
Length of work piece	1500mm - 16000mm	59.055 in to 629 in
Weight of work piece	10 ton	22000lbs
Guide rail width	1250mm	49.2125 in
Spindle bore	Φ130mm	5.1181 in
Taper in spindle nose	Φ140mm	5.5118 in
Number of speeds	21 kinds 12 kinds	21 kinds 12 kinds
Spindle speed	Forward - 2-200r/min Reverse - 2.24-178r/min	Forward - 2-200r/min Reverse - 2.24-178r/min
Longitudinal	0.1-12mm	0.00394 to 0.47244 in
Cross	0.05 -6mm	0.00197 to 0.23622 in
Top Slide	0.025-3mm	0.00098 to 0.11811 in
Thread pitch scope of the metric system	44 Kinds 1-120	44 Kinds 1-120
Englishmen scope Thread	31 Kinds 24-1/4t.p.i	31 Kinds 24-1/4t.p.i
Range of module threads	45 Kinds 0.5-60mm	45 Kinds 0.5-60mm
Range of diametral pitch threads	38 Kinds 1/2-56DP	38 Kinds 1/2-56DP
Carriage	Two Sets	Two Sets
Max cross travel of lower slide	960mm	37.795 in
Max travel of mid slide	300mm	11.811 in
Travel of tailstock quill	200mm	7.874 in
Rapid traverse speed of tool post	3740mm/min 1870mm/min 935mm/min	147.244 in/min 73.622 in/min 36.811 in/min
Diameter of tailstock quill	180mm	7.0866 in
Max travel of quill	300mm	11.811 in
Taper in bore of tailstock quill	Metric 80#	Metric 80#

STANDARD TE-1600 Series Horizontal Lathe - Ø1600mm Swing and 3,000~16,000mm B/C

Description

Specifications

Delivery

How to use a Heavy duty horizontal lathes

Information shown may differ or change without warning