*Excludes Local Taxes*
Products are built on order, general delivery is 8~16weeks and includes sea freight to most seaports.
Portable and effective tool, especially suitable for on site resurfacing of large shafts, stub shafts , “O “grooves and bearing journals/seats. This machine is suitable for horizontal and vertical machining, even at any angle, especially for on site machining from top to bottom. This powerful machine has a wide range of capability for reshaping and machining surface contact points to ensure tight fitment and smooth operation. It is made with precision-machined parts and the highest quality materials to ensure consistent and reliable performance in even the toughest environments.
Main Features:
This Product is Built On Order Only.
Deliver is 8-12 Weeks from Deposit.
Using an Onsite Journal Lathe:
Safety Precautions: Begin by ensuring all safety measures are in place, including wearing appropriate personal protective equipment (PPE).
Select the Right Lathe: Choose the onsite journal lathe suitable for the size and type of workpiece you are working on.
Machine Placement: Position the lathe securely near the workpiece, ensuring it's on a stable surface.
Workpiece Setup: Securely mount and center the workpiece between the lathe's centers or in the chuck, depending on the lathe type.
Tool Selection: Choose the appropriate cutting tool, such as a turning or facing tool, and secure it in the lathe's tool post.
Tool Height Adjustment: Adjust the tool's height to align with the workpiece's centerline, ensuring it's at the correct height for the initial cut.
Spindle Speed and Feed Rate: Set the lathe's spindle speed and feed rate according to the material being machined and the type of cut required.
Initial Cut: Make a light initial cut to verify the tool's alignment and ensure it's cutting as expected.
Start Turning: Gradually feed the tool into the workpiece while maintaining a steady cutting speed. Follow the desired turning or facing path.
Continuous Monitoring: Keep a close eye on the turning process, checking for any signs of tool wear, overheating, or deviations from the desired dimensions.
Adjust as Needed: If necessary, make real-time adjustments to the tool's position, speed, or feed rate to maintain precision.
Measure and Verify: Periodically measure the workpiece's dimensions using appropriate measuring tools to ensure it meets the required specifications.
Complete the Turning: Continue turning until you've achieved the desired dimensions and surface finish on the workpiece.
Power Off and Safety Check: After finishing the turning process, turn off the lathe and disconnect it from the power source. Ensure the machine has come to a complete stop, and perform a safety check to confirm there are no loose components or debris in the work area.
Remove the Workpiece: Carefully remove the workpiece from the lathe, inspect it for quality, and complete any necessary post-machining steps as required.