STANDARD BMC-600 Automatic NC Swing Head Bandsaw

An automatic swing head bandsaw is a specialized tool used for cutting various materials, typically metal, wood, or plastic. It has a rotating head that can tilt to make angled cuts. Here's a simple guide on how to use it:

1. Safety First: Before operating the bandsaw, wear appropriate safety gear like goggles, gloves, and hearing protection. Ensure that the work area is clear of any obstacles.
2. Power on the Bandsaw: Switch on the power to the bandsaw and familiarize yourself with the controls. There will typically be controls for adjusting blade speed, feed rate, head angle, and material clamping.
3. Material Preparation: Measure and mark the material you want to cut. Secure it firmly in the bandsaw's vice or clamp, ensuring it's stable and won't move during cutting.
4. Adjusting the Settings: Set the blade speed and feed rate based on the material being cut. Different materials require different cutting speeds for optimal results. Refer to the bandsaw's manual for recommended settings.
5. Positioning the Blade: Adjust the swing head to the desired angle for angled cuts if needed. Ensure the blade is correctly tensioned and aligned.
6. Start the Cut: Lower the saw blade slowly onto the material, using the bandsaw's controls. Follow the marked lines or cutting guides. Allow the blade to do the cutting—avoid forcing it through the material.
7. Monitor the Cutting: Keep an eye on the cutting process to ensure the blade is cutting smoothly. If needed, adjust the feed rate or blade speed during the cut for better results.
8. Completing the Cut: Once the cut is finished, raise the blade, turn off the bandsaw, and wait for the blade to come to a complete stop before removing the cut material.
9. Clean-Up: Remove any debris from the bandsaw and the work area. Properly store the bandsaw and accessories.
10. Maintenance: Regularly inspect and maintain the bandsaw according to the manufacturer's recommendations. This includes blade inspection, tension adjustments, and lubrication.

Always refer to the manufacturer's manual for specific instructions and safety guidelines for your particular model of automatic swing head bandsaw. If you're new to using this equipment, consider seeking guidance from someone experienced or undergoing proper training before operating it independently.