Machines are built on order, delivery is 9~14 weeks Shipped Worldwide- Prices include freight to your nearest sea port*
*Excludes Local Taxes*
Description
Standard UI-75 ton Universal Iron Worker:
A Universal Iron Worker with Dual Hydraulic Work Stations is a machine tool that is used to cut and shape metal. It typically has two separate work stations, each equipped with its own hydraulic system. These work stations can be used to perform a variety of tasks such as punching, shearing, bending, and notching. The tooling for each station can be quickly and easily changed out to accommodate different materials and shapes. This allows for flexibility and efficiency in metalworking operations. Some Universal Iron Worker models may also include additional features such as a press brake, a coper, or a rod shear.
Specifications
5-station (Punch, Notch, Bar shear, Flat shear, and Angle shear)
Pressure – 90 tons
Punching thickness - 20mm
Max punching diameter -30mm
Max cutting thickness - 20mm
Plate strength - ≤450N/mm2
Cutting angle - 8°
Ram stroke - 80mm
Number of stroke (80) - 8per/min
Number of stroke (20) - 25per/min
Throat depth - 355mm
Power of main motor - 7.5kw
Overall dimensions - 1860x800x1900mm
Weight of machine - 2000kg
Punching and Shearing Spec
Punch
Max Punch Diameter - Ø30mm
Max Material thickness - 20mm
Flat Shear
Shearing size of one stroke - 20x330 or 10×480mm
Bar Section Cutting
Round - 50mm diameter
Square Bar – 50x50mm
Channel/Beam – 160x60x6.5mm
Joist - 160x86x6mm
Angle Iron
At 90° Shearing – 140x140x12mm
At 45° Shearing - 50x50x5mm
T-Bar/ T-Channel
At 90° Shearing – 140x140x12mm
At 45° Shearing - 70x70x10mm
I-Beam/ Joist
At 90° Shearing - 160x86x6mm
Channel Iron
At 90° Shearing - 160x60x6.5mm
Standard Equipment
Easy change punch holder, ring and adapters
Universal die bolster for the punching of flats, angle and flanges of channel and I beam
Blades for cropping angle, round/square bar, flat bar
Punch support table c/w side stops
Shear support table
Adjustable hold down for shear, angle and section Stations
Shielded foot pedal control to both punch and shear ends
Power saving mode electric box
Automatic Overload Relief on Hydraulic System
Electric I.P. 55 Class ‘F’ T.E.F.C. Motor
Low volt electrical control circuit
Service tool kit
Delivery
This Machine is Built on Order Only.
Delivery is 8-12 Weeks from Deposit
Catalogue
Machine specifications may differ to Website display. catalogue for reference purposes only. To view available builds, please refer to website.
How to use a Universal Iron Worker with Dual Hydraulic Work Stations
Using a Universal Iron Worker with Dual Hydraulic Work Stations involves several steps:
Set up the machine: Before using the iron worker, make sure it is properly set up and connected to a power source. Check that the tooling for each work station is properly installed and tightened.
Prepare the material: Cut the metal to the desired length and shape, and place it in the appropriate work station. Make sure the metal is clean and free of any debris that could cause damage to the machine or the tooling.
Adjust the settings: Adjust the machine's settings according to the type and thickness of the material, as well as the desired end result. For example, you may need to adjust the punch stroke, the shear angle, or the bend radius.
Operate the machine: Turn on the machine and use the appropriate controls to initiate the cutting, punching, or bending process. Be sure to follow all safety precautions and to use the machine in accordance with the manufacturer's instructions.
Monitor the process: Keep an eye on the machine while it is operating to ensure that it is functioning properly and that the material is being cut or shaped as desired.
Clean up the machine: When you have finished using the iron worker, turn it off and clean up any debris or scraps. Perform any necessary maintenance on the machine, such as lubricating moving parts or replacing worn tooling.
It's also important to note that before using a Universal Iron Worker with Dual Hydraulic Work Stations, the operator should have the proper training and knowledge of the machine, the material and the process to be performed to ensure the safety and efficiency of the operation.
*Information shown may differ or change without warning*
