STANDARD UK-1300 Knee Type Universal Milling Machine
R 299,925.00
-------------------
---PROFESSIONAL GRADE--- *Mills are built on order, delivery is approx 9~14 weeks Prices include Sea Freight to your nearest port* *Excludes Local Taxes*
Description
A knee-type universal milling machine is a machine tool that has a vertically adjustable worktable that is mounted on a knee, which is a massive casting that rides vertically on the milling machine column. The knee-type milling machine has a horizontally oriented spindle that is parallel to the worktable, and the workpiece is clamped to the worktable using a vise or clamping device. The cutting tool is mounted on an arbor that is inserted into the spindle and is driven by a motor. The knee-type milling machine is capable of performing both conventional and climb milling operations and can be used to machine a wide variety of materials including metals, plastics, and composites.
Main Features:
High-strength HT200 cast-iron bed with heavy ribbing for rigidity.
Hardened guideways for accuracy, wear-resistance.
1600x360mm Work Area and 450kg Load Capacity.
Quietly-Manufactured Headstock Gears Featuring Hardened and Ground Gears.
Powerful Servo Motors Enable Precise Adjustment of Feeds on All 3 Axes.
The 5.5kW Main Drive Delivers High Torque Capacity.
Complete with Coolant System and Chip Tray for Enhanced Performance.
Using a knee-type universal milling machine involves the following steps:
Set up the workpiece: Secure the workpiece to the worktable using a vise or clamping device. Make sure that it is level and properly aligned.
Select the cutting tool: Choose the appropriate cutting tool for the operation and mount it on the arbor. Make sure that it is tightened securely and that the tool is properly aligned with the spindle.
Adjust the spindle speed: Set the spindle speed to match the recommended speed for the cutting tool and the material being machined.
Adjust the feed rate: Set the feed rate to match the recommended speed for the cutting tool and the material being machined.
Start the machine: Turn on the machine and lower the cutting tool onto the workpiece using the knee.
Perform the operation: Use the handles on the knee to control the movement of the cutting tool. Make sure to keep your hands clear of the cutting tool and to use the appropriate safety equipment.
Stop the machine: When the operation is complete, turn off the machine and raise the cutting tool away from the workpiece.
Clean up: Clean up any chips or debris from the work area and properly store the cutting tool.
It's important to always refer to the machine manual for specific instructions and safety guidelines before operating any machine.
*Information shown may differ or change without warning*
