*Excludes Local Taxes*
Products are built on order, general delivery is 8~16weeks and includes sea freight to most seaports.
A bed type CNC milling machine is a type of CNC milling machine that is characterized by its bed-style layout. The workpiece is mounted on a movable table, which is then moved along the bed of the machine to enable precise positioning and machining. The bed of the machine is typically made of a high-strength material, such as cast iron, and is supported by a series of sturdy columns.
The bed type CNC milling machine is equipped with a spindle that can be moved up and down, as well as in and out, to allow for precise control over the depth of cut. The spindle is driven by a motor, and can be equipped with a variety of cutting tools, such as end mills, drill bits, and reamers, to enable a wide range of machining operations.
In addition to the movable table and spindle, a bed type CNC milling machine may also have a number of additional features and accessories, such as automatic tool changers, coolant systems, and work holding devices, to enhance its capabilities and improve its efficiency.
- GSK or Syntech Controller
Build on Demand only.
Delivery is 10-14 weeks from deposit
Using a Bed type CNC milling machine with a tool changer involves several steps:
Preparation: First, make sure the machine is properly set up and calibrated, and that you have the correct tools for the job.
Load the material: Load the material to be milled onto the bed of the machine, making sure it is securely fastened in place.
Set up the program: Use software such as CAM (Computer-Aided Manufacturing) to create a program that tells the machine what to do. This program should include information about the milling operation, such as the speed and direction of the tool, and the depth and width of the cuts.
Set up the tool changer: The tool changer is a mechanism that allows the machine to automatically change tools as needed. Load the necessary tools into the changer and make sure they are properly secured.
Run the program: Start the milling process by running the program. The machine will automatically select the appropriate tool from the changer as needed and carry out the milling operation.
Monitor the process: While the machine is running, monitor it closely to ensure that everything is going smoothly. If there are any issues, pause or stop the program and make any necessary adjustments.
Remove the finished product: Once the milling process is complete, carefully remove the finished product from the bed of the machine.
It's important to note that the specific steps for using a bed type CNC milling machine with a tool changer may vary depending on the machine and the specific job at hand. It's always a good idea to consult the machine's manual or seek guidance from an experienced operator if you're unsure about any aspect of the process.