Téléphone :
- RSA +27 11 824 0949
- USA +1 855 550 0606
Votre succès, propulsé par nos outils fiables et sur mesure.
*Exclut les taxes locales*
Les produits sont fabriqués sur commande, la livraison générale est de 8 à 16 semaines et inclut le fret maritime vers la plupart des ports maritimes.
A hydraulic garage press with a 100 ton capacity is a heavy-duty machine designed for pressing, bending, and straightening metal parts. It uses hydraulic fluid, typically oil, to generate high levels of pressure through a pump and cylinder system. The press has a sturdy metal frame, large table-like surface for holding the workpiece, and a hydraulic pump that powers the movement of a hydraulic cylinder. The 100 ton capacity refers to the maximum amount of pressure the press can generate, allowing it to handle even the toughest metal parts. It is often used in auto repair shops, metal fabrication workshops, and other industrial settings for a variety of tasks.
Main Features:
| Specifications | Metric | Imperial |
|---|---|---|
| Capacity | 100tons | 110 US Tons |
| Pressure | 30 MPa | 4351 psi |
| Piston Travel | 220 mm | 8.66" |
| Table Travel | 405 mm | 15.95" |
| Table Size | 440 x 980 mm | 17.32 x 38.58" |
| Machine Dimensions | 1730 x 730 x 2200 mm | 68.1" x 28.7" x 86.6" |
| Weight | 1220 kg | 2691 lb |
Built on demand only, can be modified to your needs.
Delivery is 7-12 Weeks from Deposit
To use a hydraulic garage press with 100 ton capacity, follow these steps:
Prepare the workpiece: Clean and position the metal part on the press table. Ensure it is securely held in place to prevent it from moving during the pressing process.
Adjust the press: Use the adjustment mechanisms to set the height of the press cylinder to the appropriate level for your task.
Fill the hydraulic fluid: Check the fluid level in the reservoir and add oil if necessary. Ensure that the oil level is at the recommended level to ensure smooth operation of the press.
Start the pump: Turn on the hydraulic pump to build pressure in the cylinder. Observe the pressure gauge to ensure that it is building up to the desired level.
Begin the pressing process: Slowly lower the press cylinder onto the workpiece using the controls. Apply the required pressure to achieve the desired result.
Release the pressure: Once the pressing process is complete, release the pressure from the cylinder by turning off the pump.
Remove the workpiece: Use the press controls to raise the cylinder and carefully remove the workpiece from the press table.
It's important to use caution when operating a hydraulic garage press, as it can generate high levels of force and cause serious injury if used improperly. It's recommended to read and follow the manufacturer's instructions and safety guidelines before using the press.